Claas Axion 800 CEBIS, GPS - RTK NET wheel tractor
≈ NZ$139,900
Stęszew6937 km to "United States/Ashburn"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 61 819 ...
Show
+48 61 819 56 60
+48 668 04...
Show
+48 668 042 803
Poland 
Poland, Stęszew
Poland, Niepołomice
- year of manufacture – 2019,
- FPT engine – 205 HP,
- 6 cylinder engine,
- engine hours – 6372 hr,
- CEBIS – on-board information system (ISOBUS),
- CMOTION – multifunction control lever,
- CSM – headland management,
- HEXASHIFT – transmission – 24/24 (50 km/h),
- transmission with creep range – 48/48 (from 390 m/h),
- HEXACTIV – automatically gear change,
- REVERSHIFT – hydraulic reverser, (Park Lock),
- PROACTIV – front axle suspension,
- AUTO PILOT – guidance system,
- GPS PILOT – RTK NET (Terminal S10),
- 4-point cab suspension,
- drive’s seat, pneumatic suspension, swivel,
- radar sensor (slip measurement),
- front linkage,
- PTO – 540/540 ECO + 1000 rpm,
- EHR – electrohydraulic rear linkage,
- trailer air-brakes system, (2 lines),
- hydraulic brake for trailers,
- Load-Sensing hydraulic system – 110 l/min, 200 bar,
- Power Beyond hydraulic system,
- automatic air-condition,
- radio MP3/USB/AUX/SD,
- work lights – LED Premium,
- ABS socket – 12V,
- trailer coupling, automatic, pin D38 mm,
- bumper hitch,
- mechanical top-link, cat. 3 – front,
- mechanical top-link, cat. 3 – rear,
- front tyres – BKT 600/60 R30,
- rear tyres – BKT 710/60 R42,
- very good condition
Tractor after complete oil-filter inspection.
If you have any questions, please don't hesitate to contact us.
Contact person: Dawid show contacts,
show contacts
We offer also worldwide shipping.
Part exchange possible.
- Baujahr – 2019,
- FPT Motor – 205 PS,
- 6 – Zylinder Motor,
- Betriebsstunden – 6372 Std.,
- CEBIS – Bord-Informationssystems (ISOBUS),
- CMOTION – Multifunktionsgriff,
- CSM – Vorgewendemanagement,
- HEXASHIFT – Getriebe – 24/24 (50 km/h),
- Getribe mit Kreichgang – 48/48 (ab 390 m/h),
- HEXACTIV – automatisch schalten,
- REVERSHIFT – hydraulische Wendeschaltung, (Park Lock),
- PROACTIV – gefederte Vorderachse,
- AUTO PILOT - Lenksystem,
- GPS PILOT – RTK NET (Terminal S10),
- 4-Punkt-Kabinenfederung,
- Fahrersitz, pneumatisch gefedert, schwenkbar,
- Radarsensor (Schlupfmessung),
- Frontkraftheber,
- Zapfwelle – 540/540 ECO + 1000 U/min,
- EHR – Elektrohydraulischer Kraftheber,
- Druckluftbremsanlage, (2-Kreis),
- hydraulische Bremse für Anhänger,
- Load-Sensing Hydraulik System – 110 l/min, 200 bar,
- Power Beyond Hydraulik System,
- Klimaautomatik,
- Radio MP3/USB/AUX/SD,
- Arbeitsbeleuchtung – LED Premium,
- ABS-Buchse – 12V,
- Anhängekupplung, automatisch, bolzen D38 mm,
- Zugpendel, hitch,
- Oberlenker, mechanisch Kat. 3 – vorne,
- Oberlenker, mechanisch Kat. 3 – hinten,
- Bereifung vorne – BKT 600/60 R30,
- Bereifung hinten – BKT 710/60 R42,
- Sehr gute Zustand
Traktor nach einer vollständigen Öl- und Filterinspektion.
Bei Fragen stehen Wir gerne zu Verfugnung.
Kontaktperson: Dawid show contacts,
show contacts
Wir bieten auch Weltweit Transport an.
Können wir auch Ihren Gebrauchtemaschinen in Zahlung nehmen.
- rok produkcji – 2019,
- silnik FPT – 205 KM,
- 6-cio cylindrowy silnik,
- godziny silnika – 6372 mth,
- CEBIS – komputer pokładowy, (ISOBUS),
- CMOTION – drążek wielofunkcyjny,
- CSM – zarządzanie narzędziem na uwrociach,
- HEXASHIFT – przekładnia – 24/24 (50 km/h),
- przekładnia z biegami pełzającymi – 48/48 (od 390 m/h),
- HEXACTIV – automatyka zmiany przełożeń,
- REVERSHIFT – elektrohydrauliczny rewers, (Park Lock),
- PROACTIV – amortyzowana przednia oś,
- AUTO PILOT – automatyka osi kierującej,
- GPS PILOT – RTK NET (Terminal S10),
- czteropunktowa amortyzacja kabiny,
- fotel operatora z amortyzacją pneumatyczną, obrotowy,
- radar poślizgu,
- przedni TUZ,
- WOM – 540/540 ECO + 1000 obr/ min.,
- EHR – elektrohydrauliczne sterowanie podnośnikiem,
- instalacja hamulców pneumatycznych, (2-obwodowa),
- hamulec hydrauliczny na przyczepy,
- układ hydrauliczny Load-Sensing – 110 l/min, 200 bar,
- układ hydrauliczny Power Beyond,
- klimatyzacja automatyczna,
- radio MP3/USB/AUX/SD,
- oświetlenie robocze – LED Premium,
- gniazdo ABS – 12V,
- zaczep przyczepy, automatyczny, sworzeń D38mm,
- zaczep Hitch,
- cięgno mechaniczne – kat. 3 – przód,
- cięgno mechaniczne – kat. 3 – tył,
- opony przód – BKT 600/60 R30,
- opony tył – BKT 710/60 R42,
- stan bardzo dobry
Ciągnik po pełnym przeglądzie olejowo-filtrowym.
Przyjmujemy maszyny w rozliczeniu.
Oferujemy także transport ponadgabarytowy, koszty transportu ustalane są indywidualnie.
Treść niniejszego ogłoszenia nie stanowi oferty handlowej w rozumieniu art. 66 §1 Kodeksu Cywilnego oraz innych właściwych przepisów prawnych.
Kontakt:
Biuro: show contacts
Dawid Kowalski show contacts
show contacts